The plate radiator features light weight, high pressure resistance, low production energy consumption and other advantages. It has an attractive appearance, a wide variety of styles and colors. During use, full water maintenance can extend its service life. However, it is worth noting that radiators have very high requirements for the water quality of the heating system. If corrosion is prone to occur in an unsafe heating system, consumers should first understand whether the plate radiator is compatible with the heating system of the community when purchasing it, especially in the current situation where the water quality of the heating system in some communities cannot meet the standards. Now, let Elma steel plate radiator introduce it to you all.
When it comes to the installation of plate radiators, attention should also be paid. The secondary steps of radiator installation should not be combined into one step. That is, before decoration, the pipes should be connected properly and the radiators should be installed together. This way of installation saves the construction unit a lot of effort, but the installed plate radiator is not only easily damaged and accumulates a lot of dust during the entire decoration process, but also has to be removed when painting the wall or pasting wallpaper.
After the wall is painted or the wallpaper is pasted and then reinstalled, the radiator is very likely to be scratched or damaged during this disassembly and reinstallation process. This practice is actually an unstandardized and irresponsible behavior. The correct approach should be as follows: After the installation and pressing are qualified before decoration, remove the radiator, wrap it with air cushion film, and after the decoration is completed, reinstall the radiator and press it again. once it is qualified, the process is completed.
For office workers, it is not recommended to close all the valves of the plate radiator after work. Because after being completely sealed, the room temperature will drop significantly. Just as frequent starts of a car consume more fuel, when you open the valve after work, not only does it take several hours for the room temperature to reach the heating point, but also a lot of heat is consumed, which is not economical. Therefore, when no one is in the room during the day, the room temperature should be set at around 12℃. The specific setting should be determined according to individual feelings. Maintain a certain room temperature so that when entering the room at night, the temperature won't be too low, affecting the heating effect.
This article is from：http://www.355910.cn/com/aemnqp/news/itemid-30475.html